How To Fix My Galaxy Note 3 Screen

Repair guide : Screen Samsung Milky way Note 3

Level : Medium Time : 40 min Author : Alexandre

3100 people take done this repair successfully ! Why non you?

Cheers to this guide offered by SOSav, you can easily replace the screen of your Milky way Note 3.
This guide is for replacing the screen on the Samsung Galaxy Notation 3.

Some advice before you start

Repair - Repair guide: Screen Samsung Galaxy Note 3

Stride 1

Before replacing the screen of your Galaxy Note 3, you have to turn information technology off for safety reasons.

To do so, press the power push for a few seconds (on the right of the phone) and then click on "Plow off".

Pace 2

Insert and slide the nylon spudger underneath the rear case of the Galaxy Note 3.

One time lifted, you tin grasp and remove information technology.

Footstep iii

With a nylon spudger on the notch and lift the battery.

Once lifted, you tin remove it entirely from your Milky way Note 3.

Stride 4

Gently push the SIM menu and pull on it to remove it.

Grasp and remove it.

Stride 5

With a cruciform screwdriver, remove the 12 screws circled in red.

Those screws secure the midframe to the LCD bloc.

Step 6

Insert the nylon spudger between the midframe and the LCD bloc in order to elevator it slightly.

Then slide in on both sides every bit shown on the pictures and unclip the midframe.

Step seven

Echo that footstep until the frame is entirely unclip from the Galaxy Note three.

Pace 8

With the nylon spudger, lift the 7 connectors circled in red on the film.

Start with the charging connector.

Pace 9

Then disconect the tactile connector and the front end photographic camera'south.

Step 10

Now disconnect the proximity sensor connector and then the speaker and jack plug connector.

Pace 11

At present disconnect the LCD screen connector.

Step 12

Cease past disconnecting the peripherals attached to the logic board and elevator the antenna connector.

Stride 13

Now gently elevator the logic lath and remove it from the Galaxy Note 3.

Conscientious virtually the previously disconnect cable, they can bother the removal of the logic board. Don't hesitate to gently push information technology all but brand sure not to harm anything.

Step 14

With the spudger's tip, lift the front camera and remove it from its socket.

Pace xv

Now insert the nylon spudger underneath the cable that secures the proximity sensor to the front camera.

Then gently pry to remove the proximity sensor from its socket.

Stride sixteen

Use the cruciform screwdriver and remove the screw circled in ruddy that secures the jack plus to the LCD bloc of your Galaxy Notation 3.

Step 17

Utilize the nylon spudger and insert the tip into the jack plug.

Pry up to remove it from its socket.

Step 18

The jack plug and the earpiece speaker are i on the Galaxy Note 3.

With a nylon spudger, pry upwardly to remove the earpiece speaker.

It is glued, you might need to use a scrap of forcefulness to remove it.

Stride 19

With a pair of tweezers, remove the white soft piece of plastic.

Pace 20

Nevertheless with the pair of tweezers, take hold of the volume button and pull as shown on the pictures.

It should come up off easily.

Step 21

Near the connectedness cablevision, gently insert the nylon spudger between the dock connector and the LCD block frame.

Push information technology forward gently and pry up to remove it.

Step 22

With a pair of tweezers, gently pare off the dock connector strip glued to the screen.

Step 23

Utilize the pair of tweezers and take hold of the dock connector to remove it from its socket.

Pace 24

Now apply a cruciform screwdriver and remove the vibrator from the LCD block of your Galaxy note iii.

In order to practise this, gently insert the screwdriver betwixt the vibrator and the LCD block as shown on the pictures.

Step 25

Peel off the vibrator cablevision with the spudger.

Step 26

Use a pair of tweezers and remove the vibrator from the Milky way Note iii.

Footstep 27

Still with the pair of tweezers, take hold of the ability button.

Step 28

Once more, use the spudger and remove the stylus bracket .

Footstep 29

The screen is now entirely disassembled. You can supervene upon it with a new 1 if needed.